brad stafford wrote:
> I just tonight switched from the Planet CCRMA RH9 to FC1. The install
> was purely from the CDROMs dated 4/25/2004.
>
> I've seen all the latest posts about interrupts and did the required
> reading on the internet. I really managed to get RH9 cleaned up but in
> FC1 I'm seeing something a little different. I have a Delta 1010 and I'm
> running an AMD Barton 2.6 with 5 PCI slots. The question is what the
> heck are IRQ 16 and 22? I moved the sound and ethernet cards around to
> get them to 16 and 22 as they used to be eth0 on 21 and ICE1712 on 22. I
> have ACPI turned off as a service but don't have a "disable" option in
> the BIOS. I did turn off USB support in the BIOS.
>
> Is 16 like the equivalent of IRQ 3 since it's following 15?
>
> [brad@mars brad]$ cat /proc/interrupts
> CPU0
> 0: 81690 IO-APIC-edge timer
> 1: 75 IO-APIC-edge keyboard
> 2: 0 XT-PIC cascade
> 8: 1 IO-APIC-edge rtc
> 9: 0 IO-APIC-level acpi
> 12: 836 IO-APIC-edge PS/2 Mouse
> 14: 10789 IO-APIC-edge ide0
> 15: 735 IO-APIC-edge ide1
> 16: 0 IO-APIC-level ICE1712
> 22: 21 IO-APIC-level eth0
> NMI: 0
> LOC: 81633
> ERR: 0
> MIS: 0
>
> I'm getting 5.8 msec latency in JACK with 128 frames/period at 44100 and
> 2 periods/buffer. A huge improvement over the 46.1 msec using RH9 with
> capabilities.
>
> Thanks, Brad.
>
>
Brad,
First I see no reason for you to change anything. If there's no
problem to fix, then why make a problem?
Interrupts, in your case, are based on the APIC model. You machine
has an APIC (Advanced Programmable Interrupt Controller) as well as one
or more IO-APIC chips, so it supports more than the old style 15
interrupts. This is not a problem. It should be an advantage, if
everything is set up correctly.
My input would be to go with the flow. If one of these days you find
that you are getting worse performance, be it xruns or something else,
then come back and let's look at the setup of the machine. Until then,
be happy. It looks like the results are quite good, right?!?
Cheers,
Mark
