>>>>> "millward" == millward <millward@xxxxxxxxxxxxxxx> writes:
millward> I can hear my guitar input through my computer
millward> speakers so I know the signal is going into the card and
millward> coming out of it. In all cases the WAV file is created
millward> with no error messages. I then try to play it back
millward> using: play -V new_file.wav In all cases, there is
millward> silence. Nothing at all and no error messages.
I had a very similar problem after rebuilding my computer. The answer
turned out to be that there's a recording device selected, and in my
case I was trying to record "line" and the device selected was "mic".
If you go into kmix and select the "input" tab, one of the devices
will have a pink dot under it instead of a red dot. Make sure that's
the one your guitar is plugged into.
Hope this helps.
--
Laura (mailto:lconrad@xxxxxxxxxxxx , http://www.laymusic.org/ )
(617) 661-8097 fax: (501) 641-5011
233 Broadway, Cambridge, MA 02139
