On Wed, Oct 13, 2004 at 09:24:02AM +0200, Christophe Vescovi wrote: > output impedance of at least 1K. The Line in full scale output is > however 1.5Veff. Since -10dBV = 0.32Veff and +4dBu = 0.775 Veff No, 0dBu is 0.775V and +4dBu is 1.23Vrms which is close to the specified input of the SB. Looks like it's nominal +4dBu input, which would explain everything. > In any case you should consider using a preamp or a cheap console to > adjust the levels since the SBlive level adjustement is done after > Analog to Digital Conversion, a bad thing. Agreed; in an earlier message I did suggest conversion in the digital domain, but amplifying the analog signal is certainly a better solution, if more expensive. -- Anahata anahata@xxxxxxxxxxxxxx Tel: 01638 720444 http://www.treewind.co.uk Mob: 07976 263827
