On Sun, 2004-10-03 at 14:51, Pedro Lopez-Cabanillas wrote: > On Sunday 03 October 2004, Mark Knecht wrote: > > <SNIP> > > > > > Using this program is very easy. You only need to copy some files from > > > your windows driver into the directory where you unpacked the sources, > > > and run make install on it. > > > > <SNIP> > > > > These files ARE the firmware... > > No. Not the pure firmware, and not in the format that fxload needs to upload > it to the device. These files coming from the windows drivers, and needed for > the midisport loader are: > MidiSport 1x1: USB11LDR.SYS > MidiSport 2x2: USB22LDR.SYS > MidiSport 4x4: USB44LDR.SYS > MidiSport 8x8: USB88LDR.SYS > Keystation/Oxygen: UKS11LDR.SYS > > The windows SYS files are PE format files. The extractor program finds the > binary firmware inside the SYS files, and converts it to the IHX > (http://www.cs.net/lucid/intel.htm) text format needed by the program > 'fxload' (the same program that you already use to upload the ezusbmidi > firmware). > > You have the sources of the extractor here: > http://cvs.sourceforge.net/viewcvs.py/usb-midi-fw/midisport-firmware/ > > Regards, > Pedro > OK, a rose ...
