Hi, I have problems using my Edirol UM-1S: http://www.edirol.com/press/hirez_photos/um1_1s.html When I boot while it is plugged in, it doesn't appear in kaconnect. Additionally, my DSL connection will not work. When I plug it out and reboot, the DSL connection will still not work, I have to reboot again and then my box behaves correctly again. When I boot and plug the UM-1S in after booting, the mouse will hang for some seconds. After that, the UM-1S will be ready to use in kaconnect in most (but unfortunately not all) cases. When I do a tail -f /var/log/messages while pluggin it in, I get: Nov 21 00:11:33 Grandevitesse usb 1-1: new full speed USB device using address 2 Nov 21 00:11:34 Grandevitesse snd-usb-audio: probe of 1-1:1.0 failed with error -5 Nov 21 00:11:34 Grandevitesse snd-usb-audio: probe of 1-1:1.1 failed with error -5 Nov 21 00:11:34 Grandevitesse midi: probe of 2-1.1:1.0 failed with error -5 Nov 21 00:11:34 Grandevitesse midi: probe of 1-1:1.0 failed with error -5 Nov 21 00:11:34 Grandevitesse midi: probe of 1-1:1.1 failed with error -5 Nov 21 00:11:34 Grandevitesse usbcore: registered new driver midi A lsusb | grep -i Roland gives Bus 001 Device 002: ID 0582:0009 Roland Corp. When I do a cat /lib/modules/2.6.7-gentoo-r6/modules.usbmap | grep 0009 | grep 0582 I get two lines starting with snd-usb-audio usb-midi each. So, the kernel seems to know the device. The question is, if really both of the modules are needed. AFAIK, snd-usb-audio contains both the usb and the midi driver. What is usb-midi for? I'm currently using a Gentoo, 2.6.7-gentoo-r6 #5 SMP Sat Oct 9 23:31:33 CEST 2004 i686 Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz GenuineIntel GNU/Linux. The problem has been similar on my previous Mandrake box, but at least the DSL connection has not been affected. It also seems that not the DSL connection directly is affected but the network interface. pppoe tries to reconnect (I can see it in the syslog), but it can reconnect as soon as I do a /etc/init.d/net.eth0 restart Has anyone had similar problems, or does anyone use the UM-1S and has some tips? Why does my syslog give an ?probe of 1-1:1.0 failed with error -5? ? Every wee small hint is highly welcome. Best regards ce
