I will try it tonight with my new machine, but I had the 8x8 working on an older machine using CCRMA for rh9. Its been a while since I have booted that machine, but I know it was working (if that was a worry for you) I do remeber that it had to be plugged in and turned on before the machine booted On Mon, 15 Nov 2004 15:05:07 -0800, Brad Fuller <brad@xxxxxxxxxxxx> wrote: > Marije Baalman wrote: > > > > >Hi, > > > >FWIW: > >I have a similar problem with the 2x2: > >when I connect the device, it shortly shows up in lsusb, then the leds > >on the device all blink once, and then it does not show up anymore in > >lsusb. > >Other usb devices work fine. > >The MidiSport 2x2 works fine after a reboot, while the MidiSport 2x2 > >is still plugged in; it then immediately gives the nice burning > >USB-led sign that it is allright, even before I start booting Linux. > > > > > Thanks for the input. I tried different configurations (rebooting with > it plugged in, out... etc.) Unfortunately, my 8x8 does not behave like > your 2x2. At this point, I'm stumped. I'm wondering if it's a hardware > issues -- perhaps the voltage is just under a certain threshold. > > brad >
