I just had a similar problem. I was getting hum from my receiver/amp so I connected the turntable outputs directly to a mic preamp (to get enough gain to record). The problem is that records are/were recorded using what is known as the RIAA EQ. You can find the technical reasons on the web. Basically it boosts the treble and cuts the bass. All phono preamps are supposed to reverse this curve so if you're not using a phono preamp you get a very tinny sound. What I did was to put the reproducing RIAA EQ curve into JAMin (setting compression ratios to 1), run the inputs through JAMin, and then record using Ardour. I could have put the EQ into Ardour but it's nice to hear it before you record it. The RIAA EQ .jam file is now in the jamin/examples directory when you get JAMin from CVS. Just put it into ~/.jamin and load it when you start JAMin. Jan On Tue, 2004-05-04 at 04:26, Erik Steffl wrote: > so i finally got the recording on sb live! platinum working and I'd > like to rip my old LP collection. So I bought the only turntable with > pre-amp I have found, connected it and the sound was terrible (I think > it was mostly too weak, wasn't even at 50% at max), it's also a cheap > denon. I connected it to the RCA inputs on the liveDrive (front panel). > BTW the liveDrive RCA work ok with line6 guitar pod and iPod. > > so my off-topic question is - how to connect the turntable? which > turntable to get? since I mostly plan to use it to rip the LPs and I'm > not going to use it afterward I'd prefer cheaper solutions (not the > denon though:-) > > I also have receiver with phono input (so no pre-amp in turntable > needed) but I have no way to get the signal out of receiver, it only has > speaker outputs. > > so I guess I need sort-of-decent turntable with pre-amp or turntable > plus external pre-amp? any recommendations? > > (and yes, I am using linux box with gramofile, so this is at least > close to the topic:-) > > TIA > > erik
