> Jorma R wrote: > > What I haven't figured out is how to make the EMI capture at 6*24/44100 > > and playback at 2*16/44100 which would be the maximum performance by > > this box. > > Jack always tries to use the same sample format for both playback and > capture. > > Try this: > > pcm.emi62 { > type hw > card 0 # or whatever it is > } > > pcm.emi_all_24 { > type asym > playback.pcm { > type linear > slave { > pcm emi62 > format S16_LE > } > } > capture.pcm emi62 > } > > ctl.emi_all_24 { > type hw > card 0 > } > > > HTH > Clemens > > Thaks for this Clemens - I could not figure the suntax out myself. This got me further but unfortunately did not entirely resolve the problem. Now I do get 24-bit capture and 16-bit playback. But only with 2 channels of each. :) If I do not set the -i 2 switch for Jack I get only silence in the output ports. With 2 i/o channels I get the correct bit depths for both so the configuration above seems to be right. The rest may well be emi-spesific. I'll keep experimenting. -Jorma __ Sano ei kuukausimaksuille. Hanki Suomen edullisin kuukausimaksuton GSM-liittym? osoitteesta http://www.saunalahti.fi. Puhelut vain 0,109snt/min.