On Thu, Mar 18, 2004 at 10:36:15AM -0800, Mark Knecht wrote: > OK, good points one and all. I hadn't considered it in quite that way > before. To me (and I could be wrong) what you talk about above sounds > more like format conversion. I'm not a programmer so I could have this > messed up from a programmer's POV, but converting from a 24-bit ADC on > receive data to some internal float format and then later back to a > 24-bit DAC on transmit is not what I think of as 'dithering'. I grant > you that there might be some form of dithering, in the sense of removing > low-order bits, taking place. Some ADC's insert noise in their > conversion at record time. However, I wouldn't have thought that either > apps or Jack is inserting noise into the process at all those steps are > they? Floats have something like 25 bits worth of headroom when at 0dB's so when converting down to 16bit you have to drop some bits. If you drop bits and dont dither you get distortion in the output. So yes, JACK adds noise and then truncates the integer representation before sending it ALSA, the 16bit case. Its not turned on by default though, for no good reason. > My POV in the previous statement was more about the form of dithering we > use when outputting specifically to a CD, for instance. The lost bits at > the bottom problem and the fact that people can hear below the noise > floor of 16-bit audio. I don't think people can hear below the noise > floor of 24-bit audio, or at least my ears certainly can't. You cant represent 24 bits of resolution electrically in analogue at all, so no, you cant hear it until we get those firewire head-sockets :) - Steve
