> I just runned Envy24control with -c parameter and the system correctly > recognize the three cards installed (IRQ3, IRQ5, IRQ7). > > Now my problem is I can't find in Envy24control the option to set cards 1 > and 2 (or hw:1 and hw:2) as slave: concerning hardware settings I can find > only a table which let me choose the clock (from 22050 to 96000, plus s/pdif > option) and "locked" and "reset" option can be activated after choosing the > sample rate. The option should be in the "Hardware Settings" "Master Clock". There should be a "word clock" option there. If your card has that (word clock i/o) and there is no option there then you probably should post in the alsa-devel list, it is probably a bug in recognizing exactly what your card can do. I only have Midiman cards (the 1010 shows word clock as an option altough I have not been able to get that to work - when needed I sync through SPDIF). > I can't fund any other option in Envy24control which seems to help to set > other boards as slaves. > > I also noticed that running BruteFir is not possible if I set S/pdif in > sample rate options, BruteFir comes out with a "broken pipe error" at its > start and exits. Do you have a source connected to the SPDIF input? Is it sending? > P.S. You are doing an incredible job at PlanetCCarma! My best wishes! Thanks! -- Fernando