hi alan if i manage to get the card working i will write a howto, that's for sure, because it seems that i am definetly not the only one who has problems to setup up the card properly. i let you know. best marc Timothy Alan Gorman wrote: > metafor@xxxxxxx wrote: > >> hi list >> >> i followed the instructions to get the card working (thanks josh) >> but i'm still don't get any results. i've patched the kernel 2.6.5-mm4 >> with the two patches mentioned on the list. i can load the snd-usb-audio >> module, dmesg means that it's registered (module) , but i don't get >> this error-messages: >> >> config 1 interface 1 has no altsetting 1 >> config 1 interface 2 has no altsetting 1 >> config 1 interface 4 has no altsetting 2 >> config 1 interface 5 has no altsetting 2 >> config 1 interface 7 has no altsetting 2 >> config 1 interface 8 has no altsetting 2 >> >> is there a way to see if the pc atleast realise that there is a card >> conected? >> any module which has to be loaded beside snd-usb-audio? >> >> by the way i can't compile nvidia with this patched kernel, running >> nv therefore, >> anybody already solved this OT? >> >> are this 2 special patches >> http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108178375704810&q=raw >> http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108178386018353&q=raw >> allredady integrated in some standard kernel release and also the mm4? >> >> i could then go directly to 2.6.6 or 2.6.7 which would solve also my >> nvidia problem. >> sorry to bother you again with this quattro issue, but if someone can >> give a simple >> step to step advise, it would be really helpfull. >> >> thanks >> marc > > > I have a common interest in this card.. If we have a way for it to > work let me know... > thanks... >