On Thu, 29 Jul 2004, Russell Hanaghan wrote: > Ardour mixer for the live fx stuff. Right now, the volume pedal is CC10 > and it's tied to the slider widget on my Acoustic guit. channel. But he > 5 "bank" foot pedal buttons only send Prog. change. I actually set one > to "1" and the second to "127" in the pedal. I tie Pedal 1 to the > "master" volume widget in Ardour. Then the Master toggles from Value=1 > to value=127. Not proper use but thats just how Ardour interprets Prog. > Change. Trouble is, the physical pedals are not separable this way. I > cannot assign a different pedal to a different slider widget in Ardour. > I figure if I can convert the data to CC values it may seperate them and > I will have more fallibility with what hardware I already have. This is indeed a very special and complicated case. Maybe the current QMidiRoute can resolve it already with the PGM --> Note --> CC chain. The PGM --> Note would do the separation you need. And Note --> CC would convert it into the format required to control Ardour. If this does not work, it's probably the best to directly implement the solution in C based on my sample router in the ALSA Howto: http://www.suse.de/~mana/alsa090_howto.html#sect05 Matthias -- Dr. Matthias Nagorni SuSE Linux AG Maxfeldstr. 5 phone: +49 911 74053375 D - 90409 Nuernberg fax : +49 911 74053483
