On Wed, 2004-07-14 at 09:05, Clemens Ladisch wrote: > Russell Hanaghan wrote: > > I have a Delta 1010LT and I want to run and external sequencer thru the > > midi in port to run a soft synth like Fluid with a GM or GS font set. > > > > I use this midi in port already for an external controller that controls > > mixer items in Ardour. When Ardour is open, I don't seem to be able to > > connect the Qsynth port to the Delta midi in port. Is this normal? > > Only when using OSS ports (like /dev/midixx). Try to use an ALSA > sequencer port. > > > If so, is there somekind of virtual splitter out there. > > snd-virmidi for OSS ports, or snd-seq-dummy for ALSA ports. Doh! Forgot the good ol' Snd-virmidi!! I'm using alsa-seq ports. I'm not up on "snd-seq-dummy" but sure I can find it from here. Thanks again! R~ > > > HTH > Clemens > >
