On Thu, 2004-07-08 at 12:20, Joe Hartley wrote: > On Thu, 08 Jul 2004 10:19:41 -0700 > Russell Hanaghan <hanaghan@xxxxxxxxxxxx> wrote: > > > Still have some light "snap, crackle and pop" problems here. They don't > > seem to be related to X-runs. > > I was having some big problems with noises and distortion for a while. > It turns out that I had some mismatches on the dB level of my gear. > Some worked at -10dB, some at +4dB. When I mixed and matched it, I > had some baaaad sounds for a while. > > I don't know how/if the 1010LT lets you change these settings, but it > might be worth looking at. Hmmm. I hear it mostly on the ch 1 input of the 1010. Now this channel is provided with a mic preamp and it is adjustable via a jumper on the card from (I think) +4 to -10. I use this channel because the output of my Takamine is relatively low. I dont hear much distortion (unless I thump into my axe a bit) but more subtle pops at random intervals. But I buss the other fx in seperate mixer channels in Ardour back out to seperate channels of the card. I am pretty sure I hear the odd pop in the reverb and delays as well. R~ R~
