Eric Dantan Rzewnicki wrote: >Are your modules actually loaded? check with /sbin/lsmod. > >Did you install the module-init-tools package? this is required for the >new modprobe.conf module management scheme and the 2.6 kernel's new >module loading/infrastructure stuff. > >-Eric Rz. > >On Wed, Feb 25, 2004 at 06:15:41PM +0000, Tim Beauregard wrote: > > >>-----BEGIN PGP SIGNED MESSAGE----- >>Hash: SHA1 >> >>Hi L-A-users, >> >>I've just installed kernel 2.6.3 on my Debian unstable system. I am >>unable to make ALSA work. The error message I see is: >> >>tim@debian:~$ play /win/My\ Music/Various/track02.cdda.wav >>playing /win/My Music/Various/track02.cdda.wav >>sox: Can't open output file '/dev/dsp': No such device >> >>I'm presuming I've missed something in the kernel config as sound works >>fine with 2.4.24. >> >>I've compiled ASLA and OSS API emulation into the kernel (no modules), >>selected the Intel i8x0 device as I have nVidia nforce audio. I am a >>member of the audio group. alsa-base is 1.0.2c-3, alsa-utils is 1.0.2-1. >> >>Below I've pasted >> >>/etc/alsa/modutils/1.0 >>/dev/dsp >>/usr/src/kernel-source-2.6.3/.config >> >>Any suggestions I would greatly appreciate. >> >>Thank you, >> >>Tim Beauregard >> >>tim@debian:~$ more /etc/alsa/modutils/1.0 >>### DEBCONF MAGIC >># This file was automatically generated by alsa-base's debconf stuff >> >>alias char-major-116 snd >>alias char-major-14 soundcore >> >>options snd major=116 cards_limit=4 >> >>alias sound-service-0-0 snd-mixer-oss >>alias sound-service-0-1 snd-seq-oss >>alias sound-service-0-3 snd-pcm-oss >>alias sound-service-0-8 snd-seq-oss >>alias sound-service-0-12 snd-pcm-oss >>alias /dev/dsp* snd-pcm-oss >> >>alias snd-card-0 snd-intel8x0 >> >>alias snd-slot-0 snd-card-0 >>alias sound-slot-0 snd-slot-0 >> >>tim@debian:~$ ls -l /dev/dsp >>lrwxrwxrwx 1 root root 9 Feb 25 15:56 /dev/dsp -> /dev/dsp0 >> >>tim@debian:~$ ls -l /dev/dsp0 >>crw-rw---- 1 root audio 14, 3 Feb 25 15:56 /dev/dsp0 >> >> >> >> >>-----BEGIN PGP SIGNATURE----- >>Version: GnuPG v1.2.4 (GNU/Linux) >> >>iD8DBQFAPOZNsUUdIDHrdAURAo3nAJsFPbwaVsptUKJmV5X2IW6EIPuzNACfXcqE >>CSa8AIJxeMylJ7niPwOD6O4= >>=v7HZ >>-----END PGP SIGNATURE----- >> >> I don't see anything wrong with your setup, however I think you need to create the devices by running the snddevices script found in the ALSA-driver at the project's official page. I had similar troubles, I'd recommend you installing the driver, the library and the utilities (to have alsamixer, depends on alsalib). Hope this info is useful.
