Joern Nettingsmeier wrote: > Anahata wrote: > >> On Sat, Feb 07, 2004 at 12:45:03PM +0100, Joern Nettingsmeier wrote: >> >> >>> the idea is to run an eight-way symmetric audio multicore (shielded >>> pairs and an outer foil shield as well) along with 4x cat5 s/stp >>> cables carrying 10/100/1000baseTX ethernet in the same cable duct >>> over a length of about 15-20 meters. >>> >>> will this lead to problems in the audio signal? >> >> >> >> Twisted pair ethernet is a balanced signal so should radiate little. If >> your audio system is balanced too that will help. >> >> With three shields between the audio and the ethernet twisted pair I >> doubt if you'll experience problems. You don't mention whether the audio >> cable will be carrying microphone signals or only line level - that >> makes a big difference! > > > mostly microphone unfortunately. like joern says, make sure they're balanced audio cables.
