On Sun, 26 Dec 2004 14:06:44 -0500 pirrone <pirrone@xxxxxxxxxxxx> wrote: > What is in your modules configuration file? Does Fedora use > /etc/modprobe.conf or /etc/modules.conf? Here's my /etc/modules.conf: alias usb-controller usb-uhci # --- ALSACONF verion 0.9.0 --- alias char-major-116 snd alias snd-card-0 snd-ice1712 alias char-major-14 soundcore alias sound-service-0-0 snd-mixer-oss #alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss #alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss options snd major=116 cards_limit=4 device_mode=0666 options snd-ice1712 index=0 # --- END: Generated by ALSACONF, do not edit. --- alias ath0 ath_pci alias sound-slot-0 snd-ice1712 post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : > Anyway, you might try defining > these two devices with aliases that set them up so the Radium comes out > as MIDI #1 and Audiophile as #2, that way any application that by > default looks to interface 1 for input won't need to be patched in > through aconnect or qjackctrl to see the Radium. Note that there's nothing at all in modules.conf for the Radium keyboard. It's simply a MIDI controlling keyboard, it makes no sound on its own, it would be used simply to control soft synths on the PC. > I believe snd-usb-audio supports up to 8 devices, so you should be able > to define the 2 you are using to control the order in which they appear > on your system. I'll definitely take a look at this approach, as well as modifying an asound file. -- ====================================================================== Joe Hartley - UNIX/network Consultant - jh@xxxxxxxxxxxx Without deviation from the norm, "progress" is not possible. - FZappa