hi
i'm trying to connect a midi keyboard Yamaha PSS-790
to the game port of my sound card SB Audigy , using
a Y cable that claims to support SB.
I'm running Planet on fc1, ALSA 1.0.4,
rosegarden, qjctl, fluidsynth, i can
actually play midi files into them. i
also have a integrated soundcard with
midi capabilities but it's disabled in the BIOS.
here's some printout
lsmod seems fine to me (snd-seq-midi etc.)
aconnect -io gives
[root@localhost root]# aconnect -io
client 0: 'System' [type=kernel]
0 'Timer '
1 'Announce '
client 64: 'Audigy MPU-401 (UART) - Rawmidi 0' [type=kernel]
0 'Audigy MPU-401 (UART)'
32 'Audigy MPU-401 #2'
client 65: 'Emu10k1 WaveTable' [type=kernel]
0 'Emu10k1 Port 0 '
1 'Emu10k1 Port 1 '
2 'Emu10k1 Port 2 '
3 'Emu10k1 Port 3 '
[root@localhost root]# amidi -l
Device Name
hw:0,0 Audigy MPU-401 (UART)
hw:0,1 Audigy MPU-401 #2
hw:0,2 Emu10k1 Synth MIDI (16 subdevices)
hw:0,3 Emu10k1 Synth MIDI (16 subdevices)
[root@localhost root]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
a000-a00f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE
a000-a007 : ide0
a008-a00f : ide1
a400-a41f : VIA Technologies, Inc. USB (#3)
a400-a41f : usb-uhci
a800-a81f : VIA Technologies, Inc. USB (#2)
a800-a81f : usb-uhci
b000-b01f : VIA Technologies, Inc. USB
b000-b01f : usb-uhci
b400-b407 : Creative Labs SB Audigy MIDI/Game port
b800-b81f : Creative Labs SB Audigy
b800-b81f : EMU10K1
d000-dfff : PCI Bus #01
d800-d8ff : PCI device 1002:4150 (ATI Technologies Inc)
lspci -v
only the point...
00:0d.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs: Unknown device 005a
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at b800 [size=32]
Capabilities: [dc] Power Management version 2
00:0d.1 Input device controller: Creative Labs SB Audigy MIDI/Game port
(rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Flags: bus master, medium devsel, latency 32
I/O ports at b400 [disabled] [size=8]
Capabilities: [dc] Power Management version 2
Why it's this ugly word [disabled] ?
maybe shall i add some lines to
/etc/modules.conf ?
that is as follows
alias usb-controller usb-uhci
alias usb-controller1 ehci-hcd
alias ieee1394-controller ohci1394
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.0 ---
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-emu10k1
# --- END: Generated by ALSACONF, do not edit. ---
alias sound-slot-0 audigy
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :
Am i experiencing a conflict between the cards ?
many thanks
manza
