On Sat, Apr 16, 2022 at 03:20:41PM +0000, Laborejo Software Suite wrote: > >Any way to tell it once and for all to NOT autoconnect to system:* ? > >FA > > 1) If you start Tembro via NSM there will be no connections made, at all. I don't use NSM or anything similar. > 2) If you start it standalone it will connect the auditioner port, which is > very much intended, and the summing stereo channels. I consider both of these > non-proaudio preview options, where you want quick results. Here, and in every studio which has k-system calibrated monitoring, system outputs go to the monitoring speakers which are adjusted to produce 83 dB SPL for -20 dB full scale output. That is 103 dB SPL peak. Volume is controlled in software either by something like zita-mu1 or by a mixer app or a DAW. Contrary to what you may think, setting up a system like this is quite common in 'proaudio'. Wich means it is absolutely insane to autoconnect any application that does not even have a volume control to such an output. > 3) That said, to make this behaviour optional, saved in ~/.config and > with a command line switch, is already on my todo list. Next release. NOT connecting should be the default. -- FA _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
