That should work as expected. The Behringer ADA8200 Ultragain is a great
device, and I see its unconfigurability as an advantage. In fact I
swapped one of two firefaces (UFX+800) for an ADA8200 because the many
ways to configure this setup wrong were endless.
On 11.07.21 17:18, Bent Bisballe Nyeng wrote:
Hello
I have two Presonus FireStudio Live firewire interfaces working in
daisy-chain mode for a total of 16 channel pre-amped inputs and they are
working great :-)
I am however sometimes running short on channels and thought it might be
worth looking into adding a cheaper interface, such as the Behringer
ADA8200 Ultragain, and hook that up to one the the Presonus interfaces
through ADAT to ensure full sample synchronization.
I have not been able find anything information on how/if this kind of
setup would work on linux and the ffado website seem particularly sparse
with information these days.
Does anybody have a similar setup and can share some insights into what
works and what doesn't - then it would be much appreciated :-)
In particular I would be interested to know how/if the extra channel
from the ADAT interface would show up in jack?
Kind regards
Bent Bisballe Nyeng
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user
