On Fri, Apr 23, 2021 at 5:41 PM Chris Caudle <6807.chris@xxxxxxxxxxxxxx> wrote:
On 2021-04-23 16:57, robertlazarski wrote:
> I am stuck on this part. jltcdump won't connect after starting jackd
> from qjackctl.
>
> [linux-fesf(robert)]
> /home/robert> sudo /usr/local/bin/jltcdump
Seeing "sudo" is a big red flag. Why are you using sudo to start
jltcdump? Do you start all of your audio applications using sudo? By
using sudo to start jltcdump you are running it as root, but if you did
not start qjackctl using sudo then jackd and jltcdump will be running
under different user accounts and cannot access each other.
More to the point, it is recommended to never run jackd or jack
applications as root. Usually when someone is using sudo to start audio
applications it indicates that the security configuration of their
machine is incorrect and not allowing users to run applications with
realtime permissions.
You should have a directory /etc/security/limits.d/ with files for
various settings. Depending on your distribution the settings may be in
/etc/security/limits.conf or in separate files in /etc/security/limits.d
or a mix of some settings in limits.conf and some settings in the
individual files in limits.d/.
For example this is what I have in my
/etc/security/limits.d/95-jack.conf file:
# Modified limits for users of jack-audio-connection-kit
## Automatically appended by jack-audio-connection-kit
## Other documents recommend rtprio of 60 or 70 -- Chris
@jackuser - rtprio 95
@jackuser - memlock 16777216
## Automatically appended by jack-audio-connection-kit
# This seemed to override the value of 90 I set above, so commenting out
# @pulse-rt - rtprio 80
@pulse-rt - nice -20
I am running Fedora linux on my machine, which creates the group
jackuser for user accounts which will be using jackd. I think the
current default Fedora file sets the rtprio limit to 70, but I had used
95 as a limit going way back based on recommendations I saw in some
jackd FAQ. As a practical matter it won't really matter as long as you
also make sure anything else which tries to set priorities, like the
rtirq script, is coordinated to use the same maximum value.
The last section that I commented out was part of the file from Fedora,
but I think since my user account is a member of both jackuser and
pulse-rt groups, the later rtprio limit of 80 for the pulse-rt group was
overriding the limit of 95 set earlier for the jackuser group.
After correcting any problems in your conf files you will have to log
out and log back in for the changes to take effect. You can verify the
limit in use with the ulimit program:
~]$ ulimit -r
95
After verifying your user account can set realtime permissions, start
your applications again but do not use sudo. I suspect that is the
cause of your problems.
--
Chris Caudle
Thanks for the reply. I was getting this error without sudo.
[linux-fesf(robert)]
/home/robert> /usr/local/bin/jltcdump
Cannot read socket fd = 5 err = Success
Cannot open jltcdump client
JackShmReadWritePtr1::~JackShmReadWritePtr1 - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
jack_client_open() failed, status = 0x21
bye.
/home/robert> /usr/local/bin/jltcdump
Cannot read socket fd = 5 err = Success
Cannot open jltcdump client
JackShmReadWritePtr1::~JackShmReadWritePtr1 - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
jack_client_open() failed, status = 0x21
bye.
I am on OpenSuse leap 15 and I had no idea about jackuser. I needed to create the jackuser group and assign it to my user via the commands: groupadd jackuser && usermod -a -G jackuser robert .
Once I had my user account with the jackuser group then I proceeded as you suggested: 1) Run qjackctl as my user account, start jack after choosing my interface. 2) Start jltcdump with my user account. 3) Use qjackctl to connect the interface to jltcdump.
Then everything just worked. Much appreciated!
Robert
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
