Thanks this was super-informative!
We can likely rule out the idea that the smaller buffer sizes tax the computer further, leading to more fan/PSU noise, since the machine itself is not in the same room as the microphone.
I am intrigued by your comments about the sampling rate on my Babyface Pro. I have always set it to 48kHz whenever doing low-latency audio or any audio that will be transmitted over a network cable, which I mostly do superstitiously. Is there any guidance out there about what the correct sampling rate would be for my device, or about how to determine this answer for myself?
Best,
AG
On 1/3/21 2:49 PM, David Kastrup wrote:
"Andrew A. Grathwohl" <andrew@xxxxxxxxxxxx> writes:Hi folks, I have a question about my microphone audio quality when participating in a browser-based video conference, i.e., Google Meet and Jitsi on chromium browser. Starting last week, I have received numerous reports from coworkers that my audio is considerably higher quality than normal. Although my audio input has always been a high end vocal mic, the reports have indicated that I sound even better than I usually do in these conferences. My daily driver machine is a self-built Xeon workstation running Arch Linux with (I think) a well-configured RT kernel and JACK2, whose configuration if optimized for USB audio interfaces via this guide <https://wiki.linuxaudio.org/wiki/list_of_jack_frame_period_settings_ideal_for_usb_interface> [0]. I use a Peluso mic connected directly to my RME Babyface Pro interface, which is running via one of my system's USB2 ports. In pursuit of understanding why this is occurring, I looked at my JACK2 settings to see if I'd changed anything lately. Sure enough, I noticed that I have been working at a larger JACK2 hardware buffer size than normal. I typically set my size to 64 since I do a lot of real-time audio work, but have had it set to 256 or 512 lately to do some different kinds of stuff on the system. So, my question boils down to: is it reasonable to suspect the hardware buffer size has something to do with these sudden quality improvement reports from my friends & co-workers? If so, any insights into why this is the case would be greatly appreciated.The question is whether they are mixing up audio quality and connection quality. Larger buffer sizes may reduce the likelihood of dropout. They don't really do much else. However, a small buffer size may tax your computer much more, leading to more noise from the power supply and/or the computer fan. Depending on where your microphone is positioned, that can really make a difference. Another, less likely, source of difference may be a change of sample rate. Having something like the Babyface Pro work at the correct final sample rate is likely to be a very good compromise between latency and quality. And one thing not to underestimate is that they may attribute a change elsewhere to quality from you: I remember a Jitsi session where everyone's audio was plagued with echoes except for one that came across fine, from a Mac mini user. Guess whose computer was actually responsible for messing up everyone's audio with echoes...
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
