One last thing you can try, if the headphone jack still doesn't
work after a fresh install, is getting a cheap usb audio
soundcard. It will have less noise and give you a reliable dac in
the future on Linux. Here
is one that I have personally used that has saved my life a number
of times.
On 12/14/20 3:32 PM, David Sumbler
wrote:
On Fri, 11 Dec 2020 17:43:42 +0100 Jeremy Jongepier <jeremy@xxxxxxxxxxxxxx> wrote:Hello David,After much experimentation with settings, I have now got the sound from Qtractor back to the headphones. The distortion is still there. I would be tempted to think it might be a fault with my Raspberry Pi, but the sound is fine when using 'aplay', so clearly the sound system on the Pi is fundamentally OK. Comparing the settings in QJackCtl in the Parameters and Advanced tabs, they are the essentially the same both on the Pi and on my HP laptop running Ubuntu 18.04. I'm stumped.You might want to check out https://wiki.linuxaudio.org/wiki/raspberrypi#on-board_audio The onboard audio is still PWM and < 16-bit as far as I know so maybe that's the cause of the distortion.It seems possible - although since the sound is at least superficially OK when played through HDMI but is completely unusable through the headphone jack, I would have thought I needed to be looking somewhere else. I had a look at the wiki page you linked to. Unfortunately there doesn't seem to be a date on it, and I am wondering whether it is perhaps partly out of date. It mentions Raspberry Pi 1 and 2, but has no mention of 3 or 4. Also it has a section on building a real-time kernel, but I understood that all up-to-date Linux kernels have real time capability, and certainly my QJackCtl reports that jack is running in real time. I haven't so far listened to any actual music played from Qtractor through the HDMI: perhaps I should try this, to see whether the sound is sufficiently good to use for editing etc. But even if it is, it still doesn't solve the basic problem, which is that I can't use the sound coming through the headphone socket. I have a feeling I'm going to have to go back to plan A - which is using my laptop computer, as I have in the past. Qtractor and jack run fine on this. I was just hoping to use the Pi which would have been more convenient in some ways. Before I give up, I might just try a completely fresh install of the OS on the Pi. It's just possible something has got messed up along the way. Thanks for your suggestions. David _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
_______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
