On Wed, 16 Jan 2019 18:26:39 +0000 (UTC)
Jordan Muscott <augustusgorman@xxxxxxxxxxx> wrote:
> Thanks for the reply. I know this part of the question isn't linux specific, but presumably the AD converters in something like that aren't "as good" as those in a more expensive device though?
True. The Behringer is locked at 48kHz/16bits, and uses a fairly basic chip.
This is usually fine for CD-quality transfers. There are better chips one could
get, but I wouldn't be able to hear the difference in coming from a cassette.
> I guess my question is do I have to fork out for a feature rich device such as one of the RME ones, or is there something with a more limited feature set out there (eg only 2 channels) that is of equally high quality?
You can, but for me it's a cost/benefit thing. Do you need 12 channels of
I/O? The high-end pre-amps? MIDI? ADAT or SPDIF? Not for the task of
doing tape to digital conversion. If you want a really great interface with
all of that, the Babyface Pro is top-notch, but is priced accordingly.
> And then of course the linux specific question is -> Is it supported?
Yes, the UCA202 is a USB compliant device, which means you plug it in, and it's
recognized as an audio interface in your system. Couldn't be easier!
I still use a UCA202 to do my tape and LP transfers into a Linux laptop,
even though I've got a Soundcraft MTK mixer at my disposal. It does only
one thing, but it's not bad at it.
Good luck!
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh@xxxxxxxxxxxx
Without deviation from the norm, "progress" is not possible. - FZappa
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user
