On Sun, 30 Dec 2018 19:00:04 +0100, Dominique Michel wrote: >For the theremin, some provide MIDI Out and some Moog models have CV >out connectors for the volume and the pitch. This CV out solution seam >to be the best one when used with the thereminator: >https://www.wavelicker.com/en/thereminator/ Unfortunately there seems to be no English information about the A-178 Theremin Control Voltage Source on the Doepfer website. But the German page provides some nice pictures (and dead links). There's a note in English: "It's not possible to connect the antenna via an additional cable to the antenna socket. Antenna and hand form a variable capacitor with a very small capacity in the pico Farad range. The electronics of the module is puzzled out just for this capacity range. If a cable is added the capacity range changes totally and the module will no longer work ! But it's possible to mount the complete module with antenna at the desired position, e.g. into a small case that holds one or two of the modules. For this a longer bus cable is required." http://www.doepfer.de/a178.htm -- pacman -Q linux{,-rt{,-securityink,-cornflower,-pussytoes}}|cut -d\ -f2 4.20.arch1-1 4.19.10_rt8-0 4.19.8_rt6-0 4.19.5_rt4-0 4.18.16_rt9-1 _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
