On Fri, 05 Oct 2018 13:47:58 +0100, Chris Cannam wrote:
>A full-size jack is 6.3mm, not 6.5mm. So the image is of everyone
>turning up and then spending their time trying to jam oversized jacks
>into undersized sockets. An excellent joke, I thought, if wilfully
>obscure.
Unfortunately my aged caliper gauge is damaged and not good for
measuring inner diameter. However, it's good to measure outside
diameters. At least one of my Neutrik jacks has got a measured outside
diameter of 6.35 mm, while one of my elCheapo's has got an outside
diameter of 6.3 mm and there's still much clearance, if I connect
the 6.35 mm Neutrik to different sockets. I can't say for sure, but the
inner diameter of a socket might even reach be around 6.9 mm, which
would likely be enough space to join with a 6.5 mm jack. OTOH data
sheets from at least two vendors mention an inner diameter of 6.4 mm,
for the sockets, too small for 6.5 mm jacks. Anyway, I own a lot of
cables with 6.3 mm jacks, that can't be used with a lot of 6.3 mm
sockets or they at least don't ensure a safe connection, especially not
for "mobile" instruments, such as guitars ;).
--
pacman -Q linux{,-rt{-securityink,-pussytoes,-cornflower,}}|cut -d\ -f2
4.18.12.arch1-1
4.18.7_rt5-1
4.18.5_rt3-1
4.16.18_rt12-1
4.16.18_rt11-1
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user
