drivers to use for Motu1248 on TB3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



"lspci -vvv" shows this audio controller:

Multimedia audio controller: Mark of the Unicorn Inc Device 0008
	Subsystem: Mark of the Unicorn Inc Device 0008
	Physical Slot: 1-3
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at 92b00000 (64-bit, non-prefetchable) [disabled]
[size=4K]
	Region 2: Memory at 92b01000 (64-bit, non-prefetchable) [disabled]
[size=4K]
	[virtual] Expansion ROM at 92a00000 [disabled] [size=1M]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s
unlimited
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
	Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00

"lspci -nn" is "Subsystem: Mark of the Unicorn Inc Device [137a:0008]"

boltctl also recognizes the unit.

The audio device MOTU 1248 is attached/connected by cable by Thunderbolt 3
on a iMac 18.2 2017 running Fedora 27 x86_64 Gnome 3.26.2 (runs perfectly on
a iMac 2017 Retina 21,5).

Which kernel drivers and modules are needed/available to use this device as
an audio device?

How to have this audio device listed in PulseAudio?

Please advice. Thks.

Rgds
AW
 



--
Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
https://lists.linuxaudio.org/listinfo/linux-audio-user



[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux