On Fri, 11 Aug 2017 19:53:18 +0200, Hermann Meyer wrote: >Am 10.08.2017 um 05:18 schrieb Tim: >> Guitarix >> Battery powered >> 2 Hr or better run time >> Pocket sized >> For live use >> Latency <= 128 frames (at say 44.1Khz) >Here is a project which do that: > >https://github.com/rabits/onebutton Hi, "The ODROID-C2 consumes less than 0.8A in most cases" - http://odroid.com/dokuwiki/doku.php?id=en:c2_hardware The ESI UDJ6 and ESI Maya 22 USB are bus powered, unfortunately downloading the data sheets from the ESI homepage doesn't work for me. "the voltage at the hub port is specified to be in the range 5.00+0.25 −0.60 V by USB 2.0" "High-power devices draw at least 1 unit load and at most 5 unit loads (500 mA)" - https://en.wikipedia.org/wiki/USB#USB_2.0 So IIUC required are likely around 1,5A at 5V, for at least 2 hours. Would be a battery as recommended at https://electronics.stackexchange.com/questions/98896/good-portable-5v-1-5a-power-source be sufficient? Regards, Ralf _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx https://lists.linuxaudio.org/listinfo/linux-audio-user
