On Sun, 19 Feb 2017 19:28:57 +0100, Clemens Ladisch wrote: >Ralf Mardorf wrote: >> If I unbind the ehci device that shares the IRQ with audio cards, >> still all 10 available USB ports work >> >> Could somebody explain what this does mean? > >EHCI controllers handle _only_ high-speed (USB 2.0) connections; full- >and low-speed connections require a separate controller (OHCI or UHCI). >You probably have a bunch of those. > >> If I unbound ports on my old mobo, they stopped working. > >Some chipsets have EHCI controllers with a built-in hub that handles >full-/low-speed connections, so for the OS, all connections end up at >the EHCI controller. That was my first thought, since for the old mobo ohci was shown by lsmod, but to my surprise it isn't for the new mobo. However, this doesn't explain why the ports are still working for the new mobo, it becomes just more unclear. [rocketmouse@archlinux ~]$ lsmod | grep -i hci xhci_pci 16384 0 xhci_hcd 192512 1 xhci_pci ahci 36864 5 libahci 32768 1 ahci libata 253952 2 ahci,libahci ehci_pci 16384 0 ehci_hcd 77824 1 ehci_pci usbcore 249856 5 usbhid,ehci_hcd,xhci_pci,xhci_hcd,ehci_pci I wonder if there's a way to see at what speed the USB ports are working? If I try to check with an external USB drive, it unfortunately shows irrelevant SATA speed. $ sudo smartctl -i /dev/sdc | grep SATA SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Regards, Ralf _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
