Re: Jack Audio Appliance?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for your comments. I will look into the zita-njbridge. I had not heard of it.

My application is SDR (Software Defined Radio). Of the recent commodity products, the demodulated audio or I/Q are made available to software apps via:

1) Conventional audio streams. For example, I use a LP-PAN 2 panadapter attached to my transceiver along with a Xonar U7 to get 192 KHz/24-bit stereo (I/Q) data to various apps running on both Windows and Linux. I guess that most  ham radio operators these days have some digital modes software that they use on a computer using audio I/O, and lots of hams do use the 192 KHz sampling that a few sound cards offer.

2) Various USB-based protocols for up to 10 to 15 Msamp/sec 16-bit complex data (320 to 480 Mbit/sec). 

3) Various IP-based protocols up to gigabit network limits or about 20 Msamp/sec of 16-bit complex data.

I have been looking for a way to unify the multitude of hardware interfaces to a single, IP-based protocol. Ethernet seems like the way to go for many reasons.

One of the responders mentioned something about 10gbit Ethernet. Prices have come down amazingly - you can buy a 10gbit switch now for <$500, so I would not rule that out. My specific requirements are not that onerous. 1 gibabit Ethernet is probably adequate for most amateur radio operators.

It does seem to me that thinking of audio as something that a human being can directly hear is only one perspective. Cheap computers are easily fast enough to handle streaming multiple MHz of bandwidth over the network, and doing all sorts of modulation/demodulation.

I think that the professional audio and SDR worlds are really very similar. SDR operators are not interested in what audiophiles think of as "effects", but nevertheless we are very interesting in decoding and encoding all kinds of analog and digital modulations. It seems to me that both communities could use much of the same infrastructure for sharing data between applications and over networks.

When I started looking into what exists today in the way of standards for communicating streaming audio over Ethernet, Jack seemed like a very interesting option. I am still investigating.

James



________________________________________
From: Len Ovens [len@xxxxxxxxxxxxx]
Sent: Sunday, December 18, 2016 10:23 AM
To: Schatzman, James
Cc: linux-audio-user@xxxxxxxxxxxxxxxxxxxx
Subject: Re:  Jack Audio Appliance?

On Fri, 16 Dec 2016, Schatzman, James wrote:

> Is there a Jack Audio Appliance commercially available?
>
> If not, I would like to build one. Here are my requirements
>
> 1) Accepts 4 or more input audio streams at Xonar 7 rates (24-bit
> channels at 192KHz).

So not audio then. What is the actual frequency you are interested in?
Audio is 20 to 20k, so 48k sample rate. Even ADCs that will output 96k
(let alone 192k) may have the input frequency range tied well below 30k by
the analog circuitry. So an off the shelf solution for what you are doing
is unlikely.

> 2) Makes the audio streams available to Jack clients on the network.

May I suggest zita-njbridge for network clients? It seems more stable than
jack-net if SRC is ok.

> 3) Is compact and reliable.

As you would be building it, size and reliablility are in your hands :)

> What would be a reasonable compact platform to host such a device
> (processor speed/cores, memory, etc.)?

One of the multicore Atom chips would be my choice, they deal well with
low latency audio in my experience (sometimes better than i3-7 and much
easier to deal with than arm)

> Also, is it feasible to jack up the data rates even higher - say to
> several megasamples per second?

This is the statement that made me feel that it was not audio you are
interested in. It also makes me wonder why the 24 bit spec, I suspect 16
would be fine. high frequency ADCs that I have looked at are mostly 8-12
bit. Fine for making an oscilliscope for example. If you are doing rf
work, I don't know how far down the noise floor needs to be to keep BW
down... I just havn't played with it at all. That would determine the
needed bit depth.

--
Len Ovens
www.ovenwerks.net

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user



[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux