On Fri, 26 Aug 2016, jonetsu@xxxxxxxxxxxx wrote:
On Thu, 25 Aug 2016 18:19:17 -0400
termtech <termtech@xxxxxxxxxx> wrote:
Replacing the capacitors could be something to do. Are they easy to
get ? How many of these are on the card ?
OTOH, I was at the music store recently and upon mentioning 1010LT the
remarks went on about age and who is older. Maybe it could be time to
upgrade to a newer card. Maybe. I have no idea on what's on the
market that plays very well for Linux. I'll start another thread.
All reasonably priced audio interfaces with at least 8 ports are USB2.0.
Yes they work... But none of them are a match for the 1010 in stability or
latency. The other side of the arguement is that PCI itself is dead. Even
on the MB that still have them (I bought a new MB with three of them just
so I could choose the best one for my ice1712) they are possibly bridged
via PCIe.
The general thought in the Computer Audio community is that USB is what we
have to "put up with". Very few people have spent the time with USB that
in the past was spent on PCI audio, because it is just expected to have
poor(er) performance. Latency changes depending on what time it is when
the port is opened... etc. At least one person has found that the USB host
chipset makes a rather large difference in performance... The ones on
almost any motherboard will use Intel technology which just like some of
their USB 3 chips are not very good for Audio. Buying the right PCIe to
USB card can improve things a great deal. It can have it's own IRQ as well
as a good chipset.
(see
http://crimeandtheforcesofevil.com/blog/2016/07/25/so-hey-usb-chipsets-totally-matter/
)
Another thought that hits me about this is that the 1010 (not the LT) was
not cheap when it first came out. Allowing for inflation perhaps some of
the Audio Science (and other) PCIe cards are not so far off.
There are also some USB3 kinds of things starting to show up. Like:
https://www.blackmagicdesign.com/ca/products/ultrastudiousb3
While it shows as a video interface... it does have at least 8 Audio i/o
as well. The problem is that while the price is not bad... there are only
4 analog connector sets and they are line level (+4dB). There are some
extra AES but at least some of those are shared with the analog lines. The
real audio expansion would be with SDI or HDMI inputs and outputs which
are 8 audio channels each. Costwise $900 plus $300 for one of these:
https://www.bhphotovideo.com/bnh/controller/home?O=&sku=1082829&gclid=Cj0KEQjw0f-9BRCF9-D60_n4rKcBEiQAnXW4-4CSe2dKMXNOawl5XGYp9Du0MNCUe5wi7j-LLlhrKoMaAt928P8HAQ&Q=&is=REG&A=details
to get some extra inputs. Add the cost of preamps to that... (though the
delta 1010, 66 and 44 would have the same requirement so you may already
have preamps or a mixer)
I would suggest that this would be cheaper:
http://www.audioscience.com/internet/products/sound_cards/asi574x.htm
While they call it 4 channel they are 4 strereo channels for 8 audio lines
all together. There is also the:
http://www.audioscience.com/internet/products/sound_cards/asi578x.htm for
16 audio i/o.
These do both have alsa kernel modules and there is linux commandline
tools for setting the internal mixer. If you can find 8 pcie slots on your
motherboard... you can keep adding these till you fill your computer and
they will all be sample synced. Again these are line level devices. Quite
honestly, these are the devices I will be looking at to replace my delta66
when I am forced away from PCI in a future motherboard choice. (when I can
no longer find MB with PCI slots) I have not seen any USB AIs I would
consider using. Yes the USB boxs have preamps, but the quality is
questionable anyway. They are expandable but it seems USB chipsets that
work with them are few or they stop working with some kernel releases. USB
is not really designed for low latency audio. It has always been a
consumer grade, cheap and easy solution for both the manufacture and the
user.
In the end, good audio costs. If you are doing live work, latency matters.
For recording not so much. If you are currently using monitoring that
goes through the computer, buy a mixer! At least get an AI that has an
internal mixer for monitoring. In my opinion, no one should be recording
with through the computer monitoring.
Anyway, I am sure lots of other people will have comments to balance out
my biased thoughts.
--
Len Ovens
www.ovenwerks.net
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
