Adding more info below. * Peter P. <peterparker@xxxxxxxxxxxx> [2016-02-28 17:53]: > Hi, > > I am getting this in dmesg when I connect my HDSP Multiface via an > Expresscard to a Debian testing system which is known to operate these > cards: > > [251636.327240] pci 0000:05:00.0: [10ee:3fc5] type 00 class 0x040100 > [251636.327280] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0000ffff] > [251636.327491] pci 0000:05:00.0: supports D1 D2 > [251636.327496] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot > [251636.335144] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff] [251636.335176] pci 0000:05:00.0: no hotplug settings from platform > [251636.335274] cannot find the slot for index 1 (range 0-29), error: -16 > [251636.335283] snd_hdsp: probe of 0000:05:00.0 failed with error -16 > > and the red LED on the Audio interface (which indicates an error) stays lit. Running hdsploader manually shows that it doesn't find the card: hdsploader - firmware loader for RME Hammerfall DSP cards Looking for HDSP + Multiface or Digiface cards : Card 0 : HDA Intel MID at 0xf2520000 irq 43 Card 1 : EDIROL UA-25 at usb-0000:00:1a.0-1.2, full speed Card 29 : ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT26WW-1.07 The operating system sees the pci part of it at least: ~$ lspci | grep -i rme 05:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 3c) thank you for all ideas! Peter _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
