On Sun, 14 Feb 2016 20:13:31 +0100 fred <f.rech@xxxxxxxx> wrote: > > On Sat, 13 Feb 2016 16:01:57 -0500 > > > > > > % ./rtirq status > > > > PID CLS RTPRIO NI PRI %CPU STAT COMMAND > > 87 FF 90 - 130 0.0 S irq/8-rtc0 > > 547 FF 90 - 130 1.2 S irq/18-snd_ice1 > > > > > > your soundcard is supposed to be RTPRIO 80 Not sure about this. As it is mentioned in: http://wiki.linuxaudio.org/wiki/system_configuration "so choose a sensible priority value for Jack1 (70 for example, this will assign prio 80 to Jack1's watchdog thread), bearing in mind also that sound devices might get a priority in the 80-90 range if you use rtirq. Jack2 doesn't have a watchdog thread (neither does the current git version of Jack1) so you can give Jack2 an even higher prio." The system runs jackd2, so it can use a higher priority. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
