On Sat, 13 Feb 2016, jonetsu@xxxxxxxxxxxx wrote:
* Depends on soundcard, check output of
$ cat /proc/interrupts and find the interrupt for the Delta1010
From 'lspci' I got it that the 1010LT is ICE1712, then
/proc/interrupts is:
18: 132417 52953 35846 25609 IR-IO-APIC-fasteoi snd_ice1712
Thats good, your card is in a good slot.
I will have to look into this a bit further since I have to compile
jackd from upstream. The current one in this system prevents Ardour
from exporting audio.
do you have anything connected to the hw io while trying to export? the
PA-jack bridge has been reported to cause trouble there. see if:
pactl unload-module module-jackdbus-detect
from a command line makes export work. Ardour's HW should correct
themselves don't worry about thoses conenctions to hw.
If you do build your own jackd, make sure to fully remove the installed
version :)
--
Len Ovens
www.ovenwerks.net
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@xxxxxxxxxxxxxxxxxxxx
http://lists.linuxaudio.org/listinfo/linux-audio-user
