Mark Knecht <markknecht@xxxxxxxxxxx> writes:
> 1) do an lsmod and send back the results.
Module Size Used by Not tainted
snd-seq-oss 30848 0 (unused)
snd-seq-midi-event 3520 0 [snd-seq-oss]
snd-seq 44720 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 49220 0 (unused)
snd-mixer-oss 15800 0 [snd-pcm-oss]
snd-hdsp 34148 0
snd-pcm 74340 0 [snd-pcm-oss snd-hdsp]
snd-timer 18244 0 [snd-seq snd-pcm]
snd-hwdep 6144 0 [snd-hdsp]
snd-page-alloc 6836 0 [snd-hdsp snd-pcm]
snd-rawmidi 16192 0 [snd-hdsp]
snd-seq-device 4784 0 [snd-seq-oss snd-seq snd-rawmidi]
snd 38596 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-hdsp snd-pcm snd-timer snd-hwdep snd-rawmidi snd-seq-device]
soundcore 4100 9 [snd]
saa7185 2360 0 (unused)
saa7111 2776 0 (unused)
bt819 3992 0 (unused)
i2c-old 4544 3 [saa7185 saa7111 bt819]
mousedev 4468 0
keybdev 2148 0 (unused)
usbkbd 3672 0 (unused)
input 3616 0 [mousedev keybdev usbkbd]
usb-ohci 20040 0 (unused)
usbcore 65580 0 [usbkbd usb-ohci]
> 2) Show your /etc/modules.conf file so we can see what you're trying to
> run
Well it's not so much what *I am trying to run*, but what my installation
does ;-) I do not include all output, only sound related lines:
### This file is automatically generated by update-modules"
[ snip ]
keep
[ snip ]
### update-modules: start processing /etc/modutils/alsa
### DEBCONF MAGIC
# This file was automatically generated by alsa-base's debconf stuff
alias char-major-116 snd
# NEXT LINE ADDED MANUALLY ###################
alias snd-card-0 snd-hdsp
alias char-major-14 soundcore
options snd major=116 cards_limit=4 device_mode=0660
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
### update-modules: end processing /etc/modutils/alsa
[ snip ]
alias char-major-10-135 rtc
> 3) Run hdspmixer and see what signals you see when running audio through
> it. alsaplayer is fine for this purpose.
All the meters in the middle row show activity.
BTW: Alsaplayer says 'Failed to load output plugin "alsa". Trying defaults"
Is this a hint?
> 4) Run hdspconf and look at the way you have clocks set up. (I think
> this will work for your hardware, but I'm not sure.)
Oh, I hadn't noticed this program yet (It is not in alsa-tools 0.9.6)
Looks very handy! It shows:
Pref Sync Ref ADAT1 in
SyncCheck all say 'No Lock'
SPDIF In internal
SPDIF Out nothing selected
SPDIF Freq. --
Sample Clock Source 44.1
Auto Sync Ref Input --
Freq. --
System Clock Mode Master
Freq. 44.1
Thank you for your help,
Robert
