I'm trying to get BruteFIR operating in realtime on my 2496. Currently, however, it fails with the following output: ALSA I/O: Could not set audio input parameters for "maudio": Failed to set channel count to 2: Invalid argument. Failed to init input device. Failed to initialise digital audio interfaces. I get the same message regardless of whether I use the "maudio" pcm defined in my .asoundrc, or "hw", or "hw:0". I've tried setting channels to 8/0,1 on input, 10/0,1 on output, also with no effect. My input and output settings for BruteFIR are as follows: input "left input", "right input" { device: "alsa" { param: "maudio"; }; sample: "S32_LE"; channels: 2; }; output "left output", "right output" { device: "alsa" { param: "maudio"; }; sample: "S32_LE"; channels: 2; }; And my .asoundrc looks like this: pcm.maudio { type hw; card 0; device 0; } ctl.maudio { type hw; card 0; } pcm.spdif_cap { type plug; ttable.0.8 1; ttable.1.9 1; slave.pcm { type hw; card 0; device 0; } } I'm running the 2.6.0-test5 kernel, and therefore using the ALSA version included. I'd welcome any suggestions :) |) |)enji