[linux-audio-user] Using a Shure sm57 mic w/ low end soundcard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



i dont know if this helps much but i have an sm58 and find i have to 
both boost the signal on the mixer and use the preamps on my quattro to 
get a good level.....

Paul Berry wrote:

> Hello all:
> 
> I am looking for advice on using a Shure sm57 microphone directly into the mic 
> input of a Creative sbawe64 gold soundcard. I am using an impedance matching 
> XLR to 1/8" adapter and I have raised the "capture" level in the mixer.
> 
> To record anything (say using arecord) I have to crank up the mic-in level to 
> full and the result is that I get a lot of hiss and the signal is still 
> pretty quiet.
> 
> Do I need an external preamplifier to use the sm57? If so where can I go to 
> find one or schematics to build one? 
> 
> Or is there a simpler way?
> 
> Thank you for any suggestions,
> Paul
> 
> 
> 

-- 

        |\      _,,,---,,_
  ZZZzz /,`.-'`'    -.  ;-;;,_     HTTP 503: Too Busy
       |,4-  ) )-,_. ,\ (  `'-'
     '---''(_/--'  `-'\_) fL


"Do not meddle in the affairs of cats, for they are
subtle and will piss on your computer."
-- Bruce Graham


Musicians say No to RIAA Persecution and Prosecution of Music Lovers!

Sign the petition at http://www.copyleftmedia.org.uk/justsayno/


  .::. www.iriXx.org .::. www.copyleftmedia.org.uk .::.



[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux