If that is the case is there any way to have multiple outputs, as I originally described or is this not possible? - Adam On Sun, 2003-11-02 at 14:17, Reuben Martin wrote: > The .asoundrc setup should have little to do with what multiple io ports show up. When you connect jack to hw:0 any available ports on that device should show up. You would only need features available from .asoundrc if you wanted to use a plug interface of some sort, and those things are dog slow. > > regards > -Reuben > > -----Original Message----- > From: Adam King [mailto:aking@xxxxxxxxxx] > Sent: Sat 11/1/2003 7:13 PM > To: linux-audio-user@xxxxxxxxxxxxxxxxxx > Cc: > Subject: [linux-audio-user] Soundblaster Live w/Live Drive > > > > Hi all, > > I've just purchased a Soundblaster Live Platinum 5.1 w/Live Drive. I've > got it all set up and working with the ALSA drivers but I am having > trouble with JACK and the .asoundrc file. I want to be able to have > multiple in/out ports. Example, I want to be able to use jackEQ and send > the master output to speakers, and the monitor output out to headphones. > > Does anyone have a same .asoundrc file or can give me tips on how to set > it up? I've tried reading the ALSA docs but am not having much luck. > > Thanks, > > - Adam > > > > >