R Parker wrote: > --- Clemens Ladisch <clemens@xxxxxxxxxx> wrote: > > R Parker wrote: > > > I still don't understand where the usb-midi i/o > > device is. > > > ... > > > There's no messages passing through > > /dev/snd/midiC1D0 > > > > This file handles all nine ports. The ALSA library > > uses a magic IOCTL to > > select the desired port; when you access the file > > directly, you get the > > first port only. > > After examining things a little closer, your reply > confirms my conclusion. > > I think there's something wrong because no data is > making it to the /dev/snd/midiC1D0 file. > > For demonstration, I've connected everything: > ... > With this scenario anything that comes in port_N,8 > should be seen in the file /dev/snd/midiC1D0. Am I > right? Well, what I said earlier isn't entirely correct, accessing /dev/snd/midiC1D0 will open the first free port. Connecting ports will open them, so the first free port in your case was probably Port 8. And when you connect port x to port 0, data from the device at port x will be written to port 0, but you won't be able to read it from port 0 because MIDI Out 1 and MIDI In 1 are different ports. I think you really need virmidi to do what you want. Please add the following lines (or modify them) in your modules.conf: options snd cards_limit=3 alias snd-card-2 snd-virmidi alias snd-slot-2 snd-card-2 options snd-virmidi index=2 then connect the desired ports of the 8x8 to port 80:0, and then the incoming data should be available at /dev/midi02. > > If possible, you should use a program that can > > access MIDI ports via the > > ALSA library (the 8x8's ports would be named > > "hw:1,x", x = 0..8). > > I've always used dd to see check for incoming mmc > messages. It's always worked. Is this what you're > referring to? No, dd doesn't use the ALSA library. The ALSA library hides the device files behind device names. Instead of accessing the ALSA device files directly, you are supposed to use some program which uses the ALSA library. There is an ugly test program which can display the data from an ALSA rawmidi port in the alsa-lib/test directory. Please go there, run "make rawmidi", and start it with ./rawmidi -v -i hw:1,x HTH Clemens
