Jaakko, Hi. Same errors I get with the HDSP 9652. Not the Multiface, but part of the same family. I was informed by Paul Davis that there is a fix, and I beleive ho posted it on Alsa-Dev a few weeks ago. You might look there. FYI - I am not sure what the exact software relationship is between all the the HDSP family. (HDSP PCI Adapter, the DigiFace, the MuliFace and the HDSP 9652) I am unclear when we speak of firmware, is it one firmware model for all of these products? Paul talks about patches, but then I'm not sure whether they apply to me. Good luck, Mark [root@Wizard root]# modprobe snd-hdsp /lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o: insmod /lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o failed /lib/modules/2.4.20-1.12.ll.acpi/kernel/drivers/sound/pci/rme9652/snd-hdsp.o: insmod snd-hdsp failed [root@Wizard root]# On Sun, 2003-03-23 at 08:32, Jaakko Prättälä wrote: > Hi all. Has anyone got a rme hdsp with firmware revision 11 > working with alsa? If you do, could you send me your > hdsp.c (maybe hammerfall_mem.c too) as an attachment? > Or even better, a diff against current alsa cvs. > > I'd *so* like to get my multiface running. > The red error led is nice, but a bit less than > what I need from the card :-) > > If you have a non-working version, what error message > do you get from the driver in /var/log/messages? > I get: > Mar 23 16:54:29 kiertotahti kernel: Hammerfall memory allocator: no Hammerfall > cards found... > Mar 23 16:54:29 kiertotahti kernel: RME Hammerfall-DSP: no cards found > > and on the command line: > [root@kiertotahti jaakko]# /sbin/modprobe snd-hdsp > /lib/modules/2.4.19scsi_lowlat_acpi/kernel/sound/pci/rme9652/snd-hdsp.o: > init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, including > invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > /lib/modules/2.4.19scsi_lowlat_acpi/kernel/sound/pci/rme9652/snd-hdsp.o: > insmod > /lib/modules/2.4.19scsi_lowlat_acpi/kernel/sound/pci/rme9652/snd-hdsp.o > failed > /lib/modules/2.4.19scsi_lowlat_acpi/kernel/sound/pci/rme9652/snd-hdsp.o: > insmod snd-hdsp failed > > I'm just trying to track where the error is. I don't even know my firmware > version number but I suppose it's the latest since I just bought the multiface > a few days ago. > > -- > Jaakko Prättälä > Jaakko.Prattala@xxxxxxxxxxx >