Daniel James wrote: >>Microphone 30 -16,000hz >>2.2K Ohm >> >> > >Could be the wrong impedance for your soundcard mic input. My mics are between >50-600 ohms, although I do use a mixer. Do you know this mic works for sure? > > > >>So is there a way to increase the micropnones gain? with aumix settings >>on full and shouting only pruduces a tiny amount of sound. >> >> > >Bear in mind that using more gain on the soundcard input will probably cause >noise. Ideally you want the mic to have a fairly high level output so that >not much pre-amping is needed. This is where battery-powered condenser mics >come in handy. > >Cheers > >Daniel > > > > Yep. Got it going. Played with the alsamixer and it finally works. I will however go for a better mic soon Thanks everyone for your help Chris
