On Sat, 2003-06-14 at 02:44, Patrick Shirkey wrote: > Allan Klinbail wrote: > > Hi > > > > I'm getting annoyed that every time I restart the machine (or possibly > > just ALSA) I need to reconfigure my mixer settings. (especially for my > > delta 66 as I like to have the adc, dac settings setup so that the > > meters on the computer match those of my mixing desk and hardware > > compressors.. unity gain should be the same everywhere) > > > > I'm sure this is just a matter of having the right SysV init script. My > > confusion is that Mandrake has 3 scripts for sound.. it has alsa, > > alsasound and sound. > > > > Does anyone know which is the right one to be using to ensure that my > > mixer settings are saved? > > > > This is not the answer you want but, if you only need to save them at a > default volume then you can use: > > alsactl store <card> > > there is a way to do it in your modules.conf file so that everytime you > load the modules it restores the default setting. > > ex. > > alias snd-card-0 snd-cmipci > options snd-cmipci id="first" # snd_enable_midi="1" > post-install snd-cmipci /usr/sbin/alsactl restore > pre-remove snd-cmipci /usr/sbin/alsactl store Hey, it may not have been the exact answer I was looking for.. However it's a better one anyway, solves the problem and is not distro specific thanks muchly -- Allan Klinbail <allank@xxxxxxxxxxxxxxxx>
