Hi, I posted on this list a while ago, but still couldn't resolve one of my problems. I have a Dela 1010LT card, which works nice with the envy24 ALSA driver. What I want to achieve is to record from this soundcard through the OSS interface. I've been experimenting with /etc/asound.conf and the aoss utility, but to no avail. Basically what I want to achieve is to have a two channel /dev/dsp device, which corresponds to adc 3&4 on the Delta card. in /etc/asound.conf I have: # adcdac 3&4 pcm.channel2 { type plug ttable.0.2 1 ttable.0.3 1 slave.pcm ice1712 } which works nice when I use arecord -D channel2 ... now, what I want to work is something following: aoss sox -t ossdsp -r 44100 -c 2 -w /dev/dsp0 -t wav tmp.wav but no matter how I try to generate a pcm.dsp0 section in /etc/asound.conf, what I record is total silence :( as far as I understand, I need a pcm.dsp0 section, which would describe the /dev/dsp0 features. what I tried, among others is: pcm.dsp0 { type plug slave.pcm "channel2" } but this doesn't work. (it may be a problem that there is actually an OSS-driven /dev/dsp0 in the system. but setting pcm.dsp1 didn't work, it gave me non-existent device errors) can someone give me hints on setting up a proper pcm.dsp0 section?