--- kevin ernste <kevinernste@xxxxxxxxx> wrote: > > Chris Share wrote: > > > > Jack as nothing more than an audio > > router, coupled with the mixing and clock control > I get from Thomas > > Charbonnel's hdspmixer and hdspconf male it almost > magical for me. > > The HDSP mixer (TotalMix) is an amazing little tool, > allowing you to > control levels/signal path to and from any arbitrary > (or all > simultaneously) inputs, outputs, etc. > > But why not have this functionality for every ALSA > supported card via a > JACK totalmix client based on Thomas' hdspmixer > code? I wonder if interfaces like envy24control and total mix are lower level than jackd. I don't really know but am guessing that a generic mixer would be an alsa tool--amixer + gui. I haven't thought about it much but I view the hardware mixerstrip level fader as being synonymous with the "trim" on a traditional mixer. If an external device generates test tone 0db then use hardware mixer to adjust relative hardware port to 0db. Subsequently a DAW mixer is configured to route N sources to the relative hardware port which is configured to something that's thought to be 0db. Ultimately enabling many signals of various decibal levels to be routed through one or more hardware ports that have constant gain. > Mixer strips would represent available hardware > routes by default, but > strips could be added and subtracted as new clients > are started, Assuming that I'm correct about the intended purpose of hardware mixers, then your idea mixes client routes into a common interface with hardware ports. I'm thinking that on a basic and simple level the problem with this is demonstrated when you begin to use the hardware mixer to adjust level. For example, if more than one application routes playback to hardware capture ports 1,2 then adjusting the hardware capture 1,2 port level will cause all application playback sources to be adjusted. Of course that's a management problem that a DAW mixer is designed to control. Anyway, I just quickly read your letter and probably missed your point entirely. Hope I didn't create extra confusion for anyone but me--as if it's possible to prevent myself from being confused. :) ron just > like Qjackconnect but with live faders (or scopes, > jellyfish etc) like > hdspmixer. With JACK, meterbridge, and hdspmixer, > aren't we most of > the way there? > > This might also solve previous complaints by Mark > and others (the DJ > crowd) of pops and clicks when clients connect to > JACK. Levels for > each client could simply be raised in the JACK > totalmix. > > Anyone working on such a thing? > > Kevin > > ===== > "I should prefer this note not be read or, if > skimmed, that it should be forgotten." - Mallarme > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > http://sitebuilder.yahoo.com __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
