[linux-audio-user] New To List

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > I'm currently looking at getting a new soundcard--the Hoontech was
> really 
> > only a temporary measure to get sound out of the PC. Unfortunately,
> it 
> > seems that the SW1000 won't ever be supported so it's not much use.
> > 
> > I'd like a card with balanced 24-bit analog I/O and SPDIF I/O. The
> MiaMIDI 
> > card seems to have these features. Does anyone have experience with
> this 
> > card on a Linux system?
> > 
> > I also thought that a Delta66 would be suitable too.
> 
> I'll let others help you there. I'm using RME cards, but I use
> external
> A/D-D/A

Mark is right on here about PlanetCCRMA, Fernando keeps a very clean
shop and he is also an excellent source of help when you need it...and
you will need it :)

I have used various M-audio cards under Linux and found them to be
rather foolproof.  In our studio we have two machines with 1010's and
one with an OmniStudio (Delta 66 plus I/O box) that run flawlessly. 
Cards like these with the envy24 chipset also have a nice envy24control
panel which gives you access to mixer levels, clock source select,
sampling rate, route selection, etc, everything the M$/Mac version does
(your Hoontech card might also have the envy24 chip? I know the
Soundtrack DSP 24 does).

Another box (dual boot laptop) has an RME HDSP Multiface which I have
not used under Linux for a while, but there have been some exciting
recent developments for this card, including a TotalMix clone (see
RME's page).  It might be worth checking into.

Kevin

=====
"I should prefer this note not be read or, if skimmed, that it should be forgotten." - Mallarme

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com


[Index of Archives]     [Linux Sound]     [ALSA Users]     [Pulse Audio]     [ALSA Devel]     [Sox Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux