Mikhail, This is a total guess, but is your sound font recorded at 48K, or some frequency other than 44.1K? If so, it would almost certainly be out of tune. If you're running Jack, then you might try starting Jack at 48K and see if the warning goes away. I do not understand the message about a period size of 65. That one is strange. Good luck, Mark > -----Original Message----- > From: linux-audio-user-admin@xxxxxxxxxxxxxxxxxx > [mailto:linux-audio-user-admin@xxxxxxxxxxxxxxxxxx]On Behalf Of Mikhail > Ramendik > Sent: Monday, April 14, 2003 2:12 PM > To: fluid-dev list > Cc: LinuxAudioUser list > Subject: [linux-audio-user] fluidsynth: strange warning > > > Hello! > > The problem with starting fluidsynth was indeed the result of a vesion > difference between alsa-driver and alsa-lib. The alsa-driver in th > ekernel proved to be 0.9.0rc6; I got the corresponding alsa-lib from the > ALSA project site (still works only by IP for me), and compiled it from > source; and now it loads. > > But, it shows a strange warning: > > === > fluidsynth: warning: The sample rate is set to 44100, the synthesizer > may be out of tune > fluidsynth: warning: Requested a period size of 64, got 65 instead > ** Using format s16, rw, interleaved > > === > > I don't really want the synthesizer to be out of tune. So I'd like to > understand what's going on here. (This message does not appear is I run > fluidsynth with -a oss) > > -- > Sincerely yours, Mikhail Ramendik > >
