Hi,
On Tue, Dec 7, 2021 at 8:44 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Quoting Rob Clark (2021-12-07 13:57:52)
> > From: Rob Clark <robdclark@xxxxxxxxxxxx>
> >
> > Otherwise we don't get another shot at it if the bridge probes before
> > the dsi host is registered. It seems like this is what *most* (but not
> > all) of the other bridges do.
> >
> > It looks like this was missed in the conversion to attach dsi host at
> > probe time.
> >
> > Fixes: c3b75d4734cb ("drm/bridge: sn65dsi86: Register and attach our DSI device at probe")
> > Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> > Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> > ---
>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
>
> One more nit below
>
> > v2: Drop DRM_ERROR() in favor of drm_err_probe() and shift around the
> > spot where we report the error
> > v3: Add \n and cull error msgs a bit further
> >
> > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 18 +++++++-----------
> > 1 file changed, 7 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > index 02b490671f8f..c2928a6409b1 100644
> > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > @@ -740,10 +736,8 @@ static int ti_sn_attach_host(struct ti_sn65dsi86 *pdata)
> > pdata->dsi = dsi;
> >
> > ret = devm_mipi_dsi_attach(dev, dsi);
> > - if (ret < 0) {
> > - DRM_ERROR("failed to attach dsi to host\n");
> > + if (ret < 0)
> > return ret;
> > - }
> >
> > return 0;
>
> This can be simplified further to
>
> return devm_mipi_dsi_attach(dev, dsi);
Squahsed in Stephen's fix and pushed. Had to also remove "ret" which
was no longer used in this function after Stephen's change.
03848335b5b1 drm/bridge: sn65dsi86: defer if there is no dsi host
-Doug
