Re: [PATCH v4 3/5] pinctrl: qcom: Move chip specific functions to right files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 


On 12/6/2021 10:02 PM, Bjorn Andersson wrote:
Thanks for your Valuable inputs Bjorn!!!

On Fri 03 Dec 05:32 CST 2021, Srinivasa Rao Mandadapu wrote:

I don't see anything _wrong_ with the current filename, so this patch
isn't really moving chip function to the _right_ files.

May I suggest that you make $subject:

"pinctrl: qcom: Extract chip specific LPASS LPI code"

Okay. Will change accordingly.

From: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxx>

Update lpass lpi pin control driver to accommodate new lpass variant
SoC specific drivers.

I also have a hard time parsing this sentence.


Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file
and common declarations to pinctrl-lpass-lpi.h header file.

How about simply:

Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver
to allow reusing the common code in the addition of subsequent
platforms.

Okay. Will change accordingly.



Signed-off-by: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
---
  drivers/pinctrl/qcom/Kconfig                    |   8 +
  drivers/pinctrl/qcom/Makefile                   |   1 +
  drivers/pinctrl/qcom/pinctrl-lpass-lpi.c        | 250 +-----------------------
  drivers/pinctrl/qcom/pinctrl-lpass-lpi.h        |  98 ++++++++++
  drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 166 ++++++++++++++++
  5 files changed, 280 insertions(+), 243 deletions(-)
  create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
  create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 5ff4207..e750e10 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -320,4 +320,12 @@ config PINCTRL_LPASS_LPI
  	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
  	  (Low Power Island) found on the Qualcomm Technologies Inc SoCs.
+config PINCTRL_SM8250_LPASS_LPI 
+	tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
+	depends on PINCTRL_LPASS_LPI
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
+	  (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
+
  endif
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 7a12e8c..8bc877e 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
  obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
  obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
+obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 2f19ab4..bcc12f6 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -4,237 +4,16 @@
   * Copyright (c) 2020 Linaro Ltd.
   */
-#include <linux/bitops.h> 
-#include <linux/bitfield.h>
  #include <linux/clk.h>
  #include <linux/gpio/driver.h>
-#include <linux/io.h>
  #include <linux/module.h>
  #include <linux/of_device.h>
-#include <linux/of.h>
  #include <linux/pinctrl/pinconf-generic.h>
  #include <linux/pinctrl/pinconf.h>
  #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
  #include "../core.h"
  #include "../pinctrl-utils.h"
-
-#define LPI_SLEW_RATE_CTL_REG		0xa000
-#define LPI_TLMM_REG_OFFSET		0x1000
-#define LPI_SLEW_RATE_MAX		0x03
-#define LPI_SLEW_BITS_SIZE		0x02
-#define LPI_SLEW_RATE_MASK		GENMASK(1, 0)
-#define LPI_GPIO_CFG_REG		0x00
-#define LPI_GPIO_PULL_MASK		GENMASK(1, 0)
-#define LPI_GPIO_FUNCTION_MASK		GENMASK(5, 2)
-#define LPI_GPIO_OUT_STRENGTH_MASK	GENMASK(8, 6)
-#define LPI_GPIO_OE_MASK		BIT(9)
-#define LPI_GPIO_VALUE_REG		0x04
-#define LPI_GPIO_VALUE_IN_MASK		BIT(0)
-#define LPI_GPIO_VALUE_OUT_MASK		BIT(1)
-
-#define LPI_GPIO_BIAS_DISABLE		0x0
-#define LPI_GPIO_PULL_DOWN		0x1
-#define LPI_GPIO_KEEPER			0x2
-#define LPI_GPIO_PULL_UP		0x3
-#define LPI_GPIO_DS_TO_VAL(v)		(v / 2 - 1)
-#define NO_SLEW				-1
-
-#define LPI_FUNCTION(fname)			                \
-	[LPI_MUX_##fname] = {		                \
-		.name = #fname,				\
-		.groups = fname##_groups,               \
-		.ngroups = ARRAY_SIZE(fname##_groups),	\
-	}
-
-#define LPI_PINGROUP(id, soff, f1, f2, f3, f4)		\
-	{						\
-		.name = "gpio" #id,			\
-		.pins = gpio##id##_pins,		\
-		.pin = id,				\
-		.slew_offset = soff,			\
-		.npins = ARRAY_SIZE(gpio##id##_pins),	\
-		.funcs = (int[]){			\
-			LPI_MUX_gpio,			\
-			LPI_MUX_##f1,			\
-			LPI_MUX_##f2,			\
-			LPI_MUX_##f3,			\
-			LPI_MUX_##f4,			\
-		},					\
-		.nfuncs = 5,				\
-	}
-
-struct lpi_pingroup {
-	const char *name;
-	const unsigned int *pins;
-	unsigned int npins;
-	unsigned int pin;
-	/* Bit offset in slew register for SoundWire pins only */
-	int slew_offset;
-	unsigned int *funcs;
-	unsigned int nfuncs;
-};
-
-struct lpi_function {
-	const char *name;
-	const char * const *groups;
-	unsigned int ngroups;
-};
-
-struct lpi_pinctrl_variant_data {
-	const struct pinctrl_pin_desc *pins;
-	int npins;
-	const struct lpi_pingroup *groups;
-	int ngroups;
-	const struct lpi_function *functions;
-	int nfunctions;
-};
-
-#define MAX_LPI_NUM_CLKS	2
-
-struct lpi_pinctrl {
-	struct device *dev;
-	struct pinctrl_dev *ctrl;
-	struct gpio_chip chip;
-	struct pinctrl_desc desc;
-	char __iomem *tlmm_base;
-	char __iomem *slew_base;
-	struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
-	struct mutex slew_access_lock;
-	const struct lpi_pinctrl_variant_data *data;
-};
-
-/* sm8250 variant specific data */
-static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
-	PINCTRL_PIN(0, "gpio0"),
-	PINCTRL_PIN(1, "gpio1"),
-	PINCTRL_PIN(2, "gpio2"),
-	PINCTRL_PIN(3, "gpio3"),
-	PINCTRL_PIN(4, "gpio4"),
-	PINCTRL_PIN(5, "gpio5"),
-	PINCTRL_PIN(6, "gpio6"),
-	PINCTRL_PIN(7, "gpio7"),
-	PINCTRL_PIN(8, "gpio8"),
-	PINCTRL_PIN(9, "gpio9"),
-	PINCTRL_PIN(10, "gpio10"),
-	PINCTRL_PIN(11, "gpio11"),
-	PINCTRL_PIN(12, "gpio12"),
-	PINCTRL_PIN(13, "gpio13"),
-};
-
-enum sm8250_lpi_functions {
-	LPI_MUX_dmic1_clk,
-	LPI_MUX_dmic1_data,
-	LPI_MUX_dmic2_clk,
-	LPI_MUX_dmic2_data,
-	LPI_MUX_dmic3_clk,
-	LPI_MUX_dmic3_data,
-	LPI_MUX_i2s1_clk,
-	LPI_MUX_i2s1_data,
-	LPI_MUX_i2s1_ws,
-	LPI_MUX_i2s2_clk,
-	LPI_MUX_i2s2_data,
-	LPI_MUX_i2s2_ws,
-	LPI_MUX_qua_mi2s_data,
-	LPI_MUX_qua_mi2s_sclk,
-	LPI_MUX_qua_mi2s_ws,
-	LPI_MUX_swr_rx_clk,
-	LPI_MUX_swr_rx_data,
-	LPI_MUX_swr_tx_clk,
-	LPI_MUX_swr_tx_data,
-	LPI_MUX_wsa_swr_clk,
-	LPI_MUX_wsa_swr_data,
-	LPI_MUX_gpio,
-	LPI_MUX__,
-};
-
-static const unsigned int gpio0_pins[] = { 0 };
-static const unsigned int gpio1_pins[] = { 1 };
-static const unsigned int gpio2_pins[] = { 2 };
-static const unsigned int gpio3_pins[] = { 3 };
-static const unsigned int gpio4_pins[] = { 4 };
-static const unsigned int gpio5_pins[] = { 5 };
-static const unsigned int gpio6_pins[] = { 6 };
-static const unsigned int gpio7_pins[] = { 7 };
-static const unsigned int gpio8_pins[] = { 8 };
-static const unsigned int gpio9_pins[] = { 9 };
-static const unsigned int gpio10_pins[] = { 10 };
-static const unsigned int gpio11_pins[] = { 11 };
-static const unsigned int gpio12_pins[] = { 12 };
-static const unsigned int gpio13_pins[] = { 13 };
-static const char * const swr_tx_clk_groups[] = { "gpio0" };
-static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
-static const char * const swr_rx_clk_groups[] = { "gpio3" };
-static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
-static const char * const dmic1_clk_groups[] = { "gpio6" };
-static const char * const dmic1_data_groups[] = { "gpio7" };
-static const char * const dmic2_clk_groups[] = { "gpio8" };
-static const char * const dmic2_data_groups[] = { "gpio9" };
-static const char * const i2s2_clk_groups[] = { "gpio10" };
-static const char * const i2s2_ws_groups[] = { "gpio11" };
-static const char * const dmic3_clk_groups[] = { "gpio12" };
-static const char * const dmic3_data_groups[] = { "gpio13" };
-static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
-static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
-static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
-static const char * const i2s1_clk_groups[] = { "gpio6" };
-static const char * const i2s1_ws_groups[] = { "gpio7" };
-static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
-static const char * const wsa_swr_clk_groups[] = { "gpio10" };
-static const char * const wsa_swr_data_groups[] = { "gpio11" };
-static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
-
-static const struct lpi_pingroup sm8250_groups[] = {
-	LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
-	LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
-	LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
-	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
-	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
-	LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
-	LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
-	LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
-	LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
-	LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
-	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
-	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
-	LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
-	LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
-};
-
-static const struct lpi_function sm8250_functions[] = {
-	LPI_FUNCTION(dmic1_clk),
-	LPI_FUNCTION(dmic1_data),
-	LPI_FUNCTION(dmic2_clk),
-	LPI_FUNCTION(dmic2_data),
-	LPI_FUNCTION(dmic3_clk),
-	LPI_FUNCTION(dmic3_data),
-	LPI_FUNCTION(i2s1_clk),
-	LPI_FUNCTION(i2s1_data),
-	LPI_FUNCTION(i2s1_ws),
-	LPI_FUNCTION(i2s2_clk),
-	LPI_FUNCTION(i2s2_data),
-	LPI_FUNCTION(i2s2_ws),
-	LPI_FUNCTION(qua_mi2s_data),
-	LPI_FUNCTION(qua_mi2s_sclk),
-	LPI_FUNCTION(qua_mi2s_ws),
-	LPI_FUNCTION(swr_rx_clk),
-	LPI_FUNCTION(swr_rx_data),
-	LPI_FUNCTION(swr_tx_clk),
-	LPI_FUNCTION(swr_tx_data),
-	LPI_FUNCTION(wsa_swr_clk),
-	LPI_FUNCTION(wsa_swr_data),
-};
-
-static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
-	.pins = sm8250_lpi_pins,
-	.npins = ARRAY_SIZE(sm8250_lpi_pins),
-	.groups = sm8250_groups,
-	.ngroups = ARRAY_SIZE(sm8250_groups),
-	.functions = sm8250_functions,
-	.nfunctions = ARRAY_SIZE(sm8250_functions),
-};
+#include "pinctrl-lpass-lpi.h"
static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, 
  			 unsigned int addr)
@@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = {
  	.dbg_show		= lpi_gpio_dbg_show,
  };
-static int lpi_pinctrl_probe(struct platform_device *pdev) 
+int lpi_pinctrl_probe(struct platform_device *pdev)
  {
  	const struct lpi_pinctrl_variant_data *data;
  	struct device *dev = &pdev->dev;
@@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
return ret; 
  }
+EXPORT_SYMBOL(lpi_pinctrl_probe);
-static int lpi_pinctrl_remove(struct platform_device *pdev) 
+
+int lpi_pinctrl_remove(struct platform_device *pdev)
  {
  	struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
@@ -671,25 +452,8 @@ static int lpi_pinctrl_remove(struct platform_device *pdev) return 0; 
  }
+EXPORT_SYMBOL(lpi_pinctrl_remove);
-static const struct of_device_id lpi_pinctrl_of_match[] = { 
-	{
-	       .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
-	       .data = &sm8250_lpi_data,
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
-
-static struct platform_driver lpi_pinctrl_driver = {
-	.driver = {
-		   .name = "qcom-lpass-lpi-pinctrl",
-		   .of_match_table = lpi_pinctrl_of_match,
-	},
-	.probe = lpi_pinctrl_probe,
-	.remove = lpi_pinctrl_remove,
-};
-
-module_platform_driver(lpi_pinctrl_driver);
  MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
  MODULE_LICENSE("GPL");
+
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
new file mode 100644
index 0000000..ad84565
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020 Linaro Ltd.
+ */
+#ifndef __PINCTRL_LPASS_LPI_H__
+#define __PINCTRL_LPASS_LPI_H__
+
+#define LPI_SLEW_RATE_CTL_REG	0xa000
+#define LPI_TLMM_REG_OFFSET		0x1000
+#define LPI_SLEW_RATE_MAX		0x03
+#define LPI_SLEW_BITS_SIZE		0x02
+#define LPI_SLEW_RATE_MASK		GENMASK(1, 0)
+#define LPI_GPIO_CFG_REG		0x00
+#define LPI_GPIO_PULL_MASK		GENMASK(1, 0)
+#define LPI_GPIO_FUNCTION_MASK		GENMASK(5, 2)
+#define LPI_GPIO_OUT_STRENGTH_MASK	GENMASK(8, 6)
+#define LPI_GPIO_OE_MASK		BIT(9)
+#define LPI_GPIO_VALUE_REG		0x04
+#define LPI_GPIO_VALUE_IN_MASK		BIT(0)
+#define LPI_GPIO_VALUE_OUT_MASK		BIT(1)
+
+#define LPI_GPIO_BIAS_DISABLE		0x0
+#define LPI_GPIO_PULL_DOWN		0x1
+#define LPI_GPIO_KEEPER			0x2
+#define LPI_GPIO_PULL_UP		0x3
+#define LPI_GPIO_DS_TO_VAL(v)		(v / 2 - 1)
+#define NO_SLEW				-1
+
+#define LPI_FUNCTION(fname)			                \
+	[LPI_MUX_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define LPI_PINGROUP(id, soff, f1, f2, f3, f4)		\
+	{						\
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.pin = id,				\
+		.slew_offset = soff,			\
+		.npins = ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			LPI_MUX_gpio,			\
+			LPI_MUX_##f1,			\
+			LPI_MUX_##f2,			\
+			LPI_MUX_##f3,			\
+			LPI_MUX_##f4,			\
+		},					\
+		.nfuncs = 5,				\
+	}
+
+struct lpi_pingroup {
+	const char *name;
+	const unsigned int *pins;
+	unsigned int npins;
+	unsigned int pin;
+	/* Bit offset in slew register for SoundWire pins only */
+	int slew_offset;
+	unsigned int *funcs;
+	unsigned int nfuncs;
+};
+
+struct lpi_function {
+	const char *name;
+	const char * const *groups;
+	unsigned int ngroups;
+};
+
+struct lpi_pinctrl_variant_data {
+	const struct pinctrl_pin_desc *pins;
+	int npins;
+	const struct lpi_pingroup *groups;
+	int ngroups;
+	const struct lpi_function *functions;
+	int nfunctions;
+};
+
+#define MAX_LPI_NUM_CLKS	2
+
+struct lpi_pinctrl {

Afaict this is only used by the common code, if so there's no need to
expose it in the header file.


+	struct device *dev;
+	struct pinctrl_dev *ctrl;
+	struct gpio_chip chip;
+	struct pinctrl_desc desc;
+	char __iomem *tlmm_base;
+	char __iomem *slew_base;
+	struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
+	struct mutex slew_access_lock;
+	const struct lpi_pinctrl_variant_data *data;
+};
+
+int lpi_pinctrl_probe(struct platform_device *pdev);
+int lpi_pinctrl_remove(struct platform_device *pdev);
+
+#endif /*__PINCTRL_LPASS_LPI_H__*/
+
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
new file mode 100644
index 0000000..9a5db15
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020 Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lpass-lpi.h"
+
+enum lpass_lpi_functions {
+	LPI_MUX_dmic1_clk,
+	LPI_MUX_dmic1_data,
+	LPI_MUX_dmic2_clk,
+	LPI_MUX_dmic2_data,
+	LPI_MUX_dmic3_clk,
+	LPI_MUX_dmic3_data,
+	LPI_MUX_i2s1_clk,
+	LPI_MUX_i2s1_data,
+	LPI_MUX_i2s1_ws,
+	LPI_MUX_i2s2_clk,
+	LPI_MUX_i2s2_data,
+	LPI_MUX_i2s2_ws,
+	LPI_MUX_qua_mi2s_data,
+	LPI_MUX_qua_mi2s_sclk,
+	LPI_MUX_qua_mi2s_ws,
+	LPI_MUX_swr_rx_clk,
+	LPI_MUX_swr_rx_data,
+	LPI_MUX_swr_tx_clk,
+	LPI_MUX_swr_tx_data,
+	LPI_MUX_wsa_swr_clk,
+	LPI_MUX_wsa_swr_data,
+	LPI_MUX_gpio,
+	LPI_MUX__,
+};
+
+static const unsigned int gpio0_pins[] = { 0 };
+static const unsigned int gpio1_pins[] = { 1 };
+static const unsigned int gpio2_pins[] = { 2 };
+static const unsigned int gpio3_pins[] = { 3 };
+static const unsigned int gpio4_pins[] = { 4 };
+static const unsigned int gpio5_pins[] = { 5 };
+static const unsigned int gpio6_pins[] = { 6 };
+static const unsigned int gpio7_pins[] = { 7 };
+static const unsigned int gpio8_pins[] = { 8 };
+static const unsigned int gpio9_pins[] = { 9 };
+static const unsigned int gpio10_pins[] = { 10 };
+static const unsigned int gpio11_pins[] = { 11 };
+static const unsigned int gpio12_pins[] = { 12 };
+static const unsigned int gpio13_pins[] = { 13 };
+
+/* sm8250 variant specific data */
+static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+};
+
+static const char * const swr_tx_clk_groups[] = { "gpio0" };
+static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
+static const char * const swr_rx_clk_groups[] = { "gpio3" };
+static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
+static const char * const dmic1_clk_groups[] = { "gpio6" };
+static const char * const dmic1_data_groups[] = { "gpio7" };
+static const char * const dmic2_clk_groups[] = { "gpio8" };
+static const char * const dmic2_data_groups[] = { "gpio9" };
+static const char * const i2s2_clk_groups[] = { "gpio10" };
+static const char * const i2s2_ws_groups[] = { "gpio11" };
+static const char * const dmic3_clk_groups[] = { "gpio12" };
+static const char * const dmic3_data_groups[] = { "gpio13" };
+static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
+static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
+static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
+static const char * const i2s1_clk_groups[] = { "gpio6" };
+static const char * const i2s1_ws_groups[] = { "gpio7" };
+static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
+static const char * const wsa_swr_clk_groups[] = { "gpio10" };
+static const char * const wsa_swr_data_groups[] = { "gpio11" };
+static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
+
+static const struct lpi_pingroup sm8250_groups[] = {
+	LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
+	LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
+	LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
+	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
+	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
+	LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
+	LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
+	LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
+	LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
+	LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
+	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
+	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
+	LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
+	LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
+};
+
+static const struct lpi_function sm8250_functions[] = {
+	LPI_FUNCTION(dmic1_clk),
+	LPI_FUNCTION(dmic1_data),
+	LPI_FUNCTION(dmic2_clk),
+	LPI_FUNCTION(dmic2_data),
+	LPI_FUNCTION(dmic3_clk),
+	LPI_FUNCTION(dmic3_data),
+	LPI_FUNCTION(i2s1_clk),
+	LPI_FUNCTION(i2s1_data),
+	LPI_FUNCTION(i2s1_ws),
+	LPI_FUNCTION(i2s2_clk),
+	LPI_FUNCTION(i2s2_data),
+	LPI_FUNCTION(i2s2_ws),
+	LPI_FUNCTION(qua_mi2s_data),
+	LPI_FUNCTION(qua_mi2s_sclk),
+	LPI_FUNCTION(qua_mi2s_ws),
+	LPI_FUNCTION(swr_rx_clk),
+	LPI_FUNCTION(swr_rx_data),
+	LPI_FUNCTION(swr_tx_clk),
+	LPI_FUNCTION(swr_tx_data),
+	LPI_FUNCTION(wsa_swr_clk),
+	LPI_FUNCTION(wsa_swr_data),
+};
+
+static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
+	.pins = sm8250_lpi_pins,
+	.npins = ARRAY_SIZE(sm8250_lpi_pins),
+	.groups = sm8250_groups,
+	.ngroups = ARRAY_SIZE(sm8250_groups),
+	.functions = sm8250_functions,
+	.nfunctions = ARRAY_SIZE(sm8250_functions),
+};
+
+static const struct of_device_id lpi_pinctrl_of_match[] = {
+	{
+	       .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
+	       .data = &sm8250_lpi_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+
+static struct platform_driver lpi_pinctrl_driver = {
+	.driver = {
+		   .name = "qcom-sm8250-lpass-lpi-pinctrl",
+		   .of_match_table = lpi_pinctrl_of_match,
+	},
+	.probe = lpi_pinctrl_probe,
+	.remove = lpi_pinctrl_remove,
+};
+
+module_platform_driver(lpi_pinctrl_driver);
+MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver");
+MODULE_LICENSE("GPL");
+

Unnecessary empty line.

Thanks,
Bjorn


--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux