Re: [PATCH V4 1/6] dt-bindings: regulator: Add "regulator-min-dropout-voltage-microvolt"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/6/2021 11:55 PM, Mark Brown wrote:
On Mon, Dec 06, 2021 at 06:33:26PM +0530, Satya Priya Kakitapalli (Temp) wrote:
On 11/25/2021 8:47 PM, Mark Brown wrote:
Usually this is a fixed property of the regulator rather than something
that varies per board - why have a DT property?
The min-dropout value (headroom) varies with boards, that's why we have a DT
property for it. We overwrite the default value in driver with actual value
read from DT
Interesting.  How exactly does that end up happening - presumably other
systems are going to run into it?


The parent supplies such as "vdd-l1-l2" are coming from other pmic regulators, which are shared supplies with other subsystems like BT, Display etc, they vary between boards as per requirements, so we cannot expect these to be fixed and so are the headroom values. We get the headroom values from PMIC systems team for every target.


If you do have board designs which somehow managed to introduce
additional dropouts (seems pretty concerning TBH) then I think the best
way to handle that is to add a generic property for it and have that
either added on to or override the requirements of the regulator itself
which should continue to be defined in the driver.  That way only boards
with issues need to do anything which will avoid bugs with the property
being omitted in what should be the common case.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux