It adds DT binding support for Qualcomm MPM interrupt controller. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx> --- .../interrupt-controller/qcom,mpm.yaml | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml new file mode 100644 index 000000000000..22e87fe2eb8e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcom MPM Interrupt Controller + +maintainers: + - Shawn Guo <shawn.guo@xxxxxxxxxx> + +description: + Qualcomm Technologies Inc. SoCs based on the RPM architecture have a + MSM Power Manager (MPM) that is in always-on domain. In addition to managing + resources during sleep, the hardware also has an interrupt controller that + monitors the interrupts when the system is asleep, wakes up the APSS when + one of these interrupts occur and replays it to GIC interrupt controller + after GIC becomes operational. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - const: qcom,qcm2290-mpm + + reg: + maxItems: 1 + description: + Specifies the base address and size of vMPM registers in RPM MSG RAM. + + interrupts: + maxItems: 1 + description: + Specify the IRQ used by RPM to wakeup APSS. + + mboxes: + maxItems: 1 + description: + Specify the mailbox used to notify RPM for writing vMPM registers. + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell is the MPM pin number for the interrupt, and the second + is the trigger type. + +required: + - compatible + - reg + - interrupts + - mboxes + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mpm: interrupt-controller@45f01b8 { + compatible = "qcom,qcm2290-mpm"; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + reg = <0x45f01b8 0x1000>; + mboxes = <&apcs_glb 1>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + }; -- 2.17.1
